Industry News

This artical is forcus on how to choose suitable machine for PET preform mould.

People always threw away the PET bottle with cap, but less people knows it is very dangerous in the PET bottle recycling process.

How to improve the quality of PET perform transparency is one of the most important factors

Need to lower your packaging molding cost? We have the efficient and profitable packaging mould solutions for that.

How to make a high quality PET preform mould? Below are some points for clear explain.

Taoyuan Mould is the biggest plastic PET preform mold making company. Taoyuan is famous for high quality Chinese PET preform molds. Annually we produce over 120 sets high performance plastic PET preform moulds. We supply high quality China plastic PET preform molds to all over world customers. This is PET preform molds basic information:

Tamper-evident plastic closure is widely used in current plastic bottle packing market, especially in the drink bottle packing. We could divide the tamper-evident plastic closure into carbonated soft drink closure and non-carbonated soft drink closure. Main plastic material of tamper-evident plastic closure is PP (polypropylene), through injection way and heat pressing forming technology to get the final product.Tamper-evident plastic closure should be convenient for customer to open and also need to avoid leakage problem due to the poor sealing performance. Therefore, reasonable way to test the tamper-evident plastic closure comes up to the keystone in the production process.

We offer high quality anti-theft cap mould, auger-type cap mould, bowknot cap mould, automatic flip, bounce type cap mould and so on.

Looking forward to starting your plastic preform manufacturing business? Well, then you are in the right place if you are a green hand. Here would show the plastic preform solution basics to help you make the preform project clearer.

PET bottle is more and more useful in nowadays, so a good preform blowing a good bottle is very important. However, how to identify a good preform, that is a big question.Taoyuan Mould is a professional mould manufacturer in the Southeast of China with nearly 15 years experiences. We can offer you the good preform solution.

Because PET plastic material has strong moisture absorption, the material must be dried before processing, and the drying temperature is 150°C for 4 hours or more; generally 170°C for 3-4 hours. The air shot method can be used to check whether the material is completely dry. The proportion of recycled PET preforms should generally not exceed 25%, and the recycled materials should be thoroughly dried.

In the current market, plastic bottle packaging is questionable, but with the global economic recovery and plastic bottle packaging difficult to substitute in the short term. Plastic bottles will have